10NS61 Brushed DC Motor
Portescap
Brushed DC Motor
With a design combining high power density and precious metal commutation, the 10NS61 can deliver a torque greater than 0.8 mNm continuously in a very compact package.
Downloads
| Winding | unit | 10NS61-107C.5 | 10NS61-105C.5 | 10NS61-104C.5 |
|---|
| Diameter | in |
0.39 |
0.39 |
0.39 |
|---|
| Diameter | mm |
10 |
10 |
10 |
|---|
| Nominal Voltage | Volt |
3.0 |
6.0 |
9.0 |
|---|
| Optimization (rpm) | |
|
|
|
|---|
| No-Load Speed | rpm |
10,100 |
10,400 |
10,700 |
|---|
| Type | |
|
|
|
|---|
| Resolution (line counts) | |
|
|
|
|---|
| Supply Voltage (V) | |
|
|
|
|---|
| Supply Current - typical (mA) | |
|
|
|
|---|
| Supply Current - maxium (mA) | |
|
|
|
|---|
| Supply Current - stand-by (μA) | |
|
|
|
|---|
| Rise time (ns) | |
|
|
|
|---|
| Fall time (ns) | |
|
|
|
|---|
| No-Load Current | mA |
11.0 |
4.2 |
3.6 |
|---|
| Max continuous mechanical power (@ 25°C) | |
|
|
|
|---|
| Max continuous Current (A) | |
|
|
|
|---|
| Max Continuous Torque (mNm) | |
|
|
|
|---|
| Max Continuous Torque (oz-in) | |
|
|
|
|---|
| Terminal Resistance | Ω |
10.8 |
43.0 |
98.0 |
|---|
| Output Power | W |
0.7 |
0.7 |
0.7 |
|---|
| Stall Torque | oz-in |
0.11 |
0.11 |
0.10 |
|---|
| Stall Torque | mNm |
0.76 |
0.75 |
0.71 |
|---|
| Efficiency | % |
64 |
68 |
64 |
|---|
| Speeds up to | rpm |
12,000 |
12,000 |
12,000 |
|---|
| Torque up to | oz-in |
0.13 |
0.13 |
0.12 |
|---|
| Torque up to | mNm |
0.90 |
0.90 |
0.85 |
|---|
| Current up to (thermal limits) | Amp |
0.34 |
0.17 |
0.12 |
|---|
| Back-EMF Constant | mV/rpm |
0.29 |
0.57 |
0.81 |
|---|
| Torque Constant | mNm/A |
2.7 |
5.4 |
7.7 |
|---|
| Torque Constant | oz-in/A |
0.38 |
0.76 |
1.09 |
|---|
| Motor Regulation | 10³/Nms |
1,500 |
1,500 |
1,600 |
|---|
| Motor regulation k/R½ | mNm/W |
|
|
|
|---|
| Motor regulation k/R½ (oz-in/W) | |
|
|
|
|---|
| Internal resistance - phase to phase (W) | |
|
|
|
|---|
| Line to Line resistance at connectors (Ω) | |
|
|
|
|---|
| Inductance - phase to phase (mH) | |
|
|
|
|---|
| Friction Torque | oz-in |
0.003 |
0.003 |
0.003 |
|---|
| Friction Torque | mNm |
0.02 |
0.02 |
0.02 |
|---|
| Rotor Inductance | µH |
6 |
15 |
25 |
|---|
| Mechanical Time Constant | ms |
7.0 |
7.0 |
8.0 |
|---|
| Rotor Inertia | gcm² |
|
|
|
|---|
| Rotor Inertia | gcm² |
0.050 |
0.050 |
0.050 |
|---|
| Thermal Resistance | C/W |
23/48 |
23/48 |
23/48 |
|---|
| Thermal Time Constant | C/W |
5/150 |
5/150 |
5/150 |
|---|
| Absolute accuracy 2 ph. On, Full step mode (degree) | |
|
|
|
|---|
| Ambient working temperature range (C) | |
|
|
|
|---|
| Ambient working temperature range (F) | |
|
|
|
|---|
| Bearing Type | |
|
|
|
|---|
| Detent Torque, Max (mNm) | |
|
|
|
|---|
| Detent Torque, Max (oz-in) | |
|
|
|
|---|
| Dielectric Withstanding Voltage (VAC) | |
|
|
|
|---|
| Holding Torque, MIN (mNm) | |
|
|
|
|---|
| Holding Torque, MIN (oz-in) | |
|
|
|
|---|
| Inductance per Phase, typ (mH) | |
|
|
|
|---|
| Insulation Resistance at 500 VDC (Mohms) | |
|
|
|
|---|
| Leadwire | |
|
|
|
|---|
| Maximum Coil Temperature (C) | |
|
|
|
|---|
| Maximum Coil Temperature (F) | |
|
|
|
|---|
| Operating Voltage (VDC) | |
|
|
|
|---|
| Rated Current per Phase (A) | |
|
|
|
|---|
| Resistance per Phase, ± 10% (Ohms) | |
|
|
|
|---|
| Rotor Inertia (oz-in-sec²10-6) | |
|
|
|
|---|
| Step Angle (degree) | |
|
|
|
|---|
| Electrical time constant (ms) | |
|
|
|
|---|
| Max motor speed (rpm) | |
|
|
|
|---|
| Ambient storage temperature range (C) | |
|
|
|
|---|
| Ambient storage temperature range (F) | |
|
|
|
|---|
| Ball bearings preload (N) | |
|
|
|
|---|
| Axial static force without shaft support (N) | |
|
|
|
|---|
| Max winding temperature (C) | |
|
|
|
|---|
| Max Winding Temperature (C) | |
|
|
|
|---|
| Max Winding Temperature (F) | |
|
|
|
|---|
| Max winding temperature (F) | |
|
|
|
|---|
| Hall Sensor Elecrical Phasing (degree) | |
|
|
|
|---|
| Typical Housing Material | |
|
|
|
|---|
| Continuous Stall Current (A) | |
|
|
|
|---|
| Peak Torque for 1s (mNm) | |
|
|
|
|---|
| Peak Torque for 1s (oz-in) | |
|
|
|
|---|
| Peak Current (A) | |
|
|
|
|---|
| Max Axial Shaft Load (N) | |
|
|
|
|---|
| Max Axial Shaft Load (oz) | |
|
|
|
|---|
| Max Radial Shaft Load (N) | |
|
|
|
|---|
| Max Radial Shaft Load (oz) | |
|
|
|
|---|
| Shaft Load Max Axial (lb) | |
|
|
|
|---|
| Shaft Load Max Axial (N) | |
|
|
|
|---|
| Shaft Load Max Radial (lb) | |
|
|
|
|---|
| Shaft Load Max Radial (N) | |
|
|
|
|---|
| Length (in) | |
|
|
|
|---|
| Length (mm) | |
|
|
|
|---|
| Steps per Revolution | |
|
|
|
|---|
| Back EMF Amplitude (V/ksteps/s) | |
|
|
|
|---|
| Nominal Phase Current (1 ph. On) (A) | |
|
|
|
|---|
| Nominal Phase Current (2 ph. On) (A) | |
|
|
|
|---|
| Angular Acceleration (nominal current) | |
|
|
|
|---|
| Axial Shaft Play (µm) | |
|
|
|
|---|
| Holding Torque Typical (mNm) | |
|
|
|
|---|
| Holding Torque Typical (oz-in) | |
|
|
|
|---|
| Holding Torque, 1.5x nominal current (mNm) | |
|
|
|
|---|
| Holding Torque, 1.5x nominal current (oz-in) | |
|
|
|
|---|
| Natural Resonance Frequency @nominal current (Hz) | |
|
|
|
|---|
| Power rate (nominal current) (kW/s) | |
|
|
|
|---|
| Radial Shaft Play (µm) | |
|
|
|
|---|
| Max. Force* @ .001" (0.0254 mm) / Step (N) | |
|
|
|
|---|
| Max. Force* @ .001" (0.0254 mm) / Step (oz) | |
|
|
|
|---|
| Max. Force* @ .002" (0.0508 mm) / Step (N) | |
|
|
|
|---|
| Max. Force* @ .002" (0.0508 mm) / Step (oz) | |
|
|
|
|---|
| Max. Force* @ .004"(0.1016 mm) / Step (N) | |
|
|
|
|---|
| Max. Force* @ .004"(0.1016 mm) / Step (oz) | |
|
|
|
|---|
| Max. Travel @ 0.001" (0.0254 mm) / Step (N) | |
|
|
|
|---|
| Max. Travel @ 0.001" (0.0254 mm) / Step (oz) | |
|
|
|
|---|
| Max. Travel @ 0.002" (0.0508 mm) / Step (N) | |
|
|
|
|---|
| Max. Travel @ 0.002" (0.0508 mm) / Step (oz) | |
|
|
|
|---|
| Max. Travel @ 0.004" (0.1016 mm) / Step (N) | |
|
|
|
|---|
| Max. Travel @ 0.004" (0.1016 mm) / Step (oz) | |
|
|
|
|---|
| Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N) | |
|
|
|
|---|
| Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz) | |
|
|
|
|---|
| Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N) | |
|
|
|
|---|
| Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz) | |
|
|
|
|---|
| Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N) | |
|
|
|
|---|
| Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz) | |
|
|
|
|---|
| Output signal | |
|
|
|
|---|
| Direction of rotation ( = / ≠) | |
|
|
|
|---|
| Max. Recommended Input Speed (rpm) | |
|
|
|
|---|
| Number of gear stages | |
|
|
|
|---|
| Electrical phase shift (degree) | |
|
|
|
|---|
| Duty cycle (%) | |
|
|
|
|---|
| Maximum count frequency (kHz) | |
|
|
|
|---|
| Maximum speed @ 512 ppr (10-7 x kgm²) | |
|
|
|
|---|
| Operating Temperature Range: Motor | °C |
-30C to 85C |
-30C to 85C |
-30C to 85C |
|---|
| Operating Temperature Range: Motor | °F |
-22F to 185F |
-22F to 185F |
-22F to 185F |
|---|
| Operating Temperature Range: Rotor | °C |
100C |
100C |
100C |
|---|
| Operating Temperature Range: Rotor | °F |
212F |
212F |
212F |
|---|
| Code wheel moment of inertia (10-7 x kgm²) | |
|
|
|
|---|
| Weight | oz |
0.56 |
0.56 |
0.56 |
|---|
| Weight | g |
16.0 |
16.0 |
16.0 |
|---|
