Linear Actuators - Stepper

26DBM-L Permanent Magnet Stepper Digital Linear Actuator

Permanent Magnet Stepper Digital Linear Actuator

The 26DBM-L is a non-captive linear actuator that provides a long stroke length and up to 128 oz of linear force in a 26 mm frame size. The 7.5 degree step angle and option of 0.0005" lead screw pitch options allows for greater positional resolution. Mclennan holds stock of various configurations in the UK for immediate delivery. For technical assistance and details of value added assemblies, including gearboxes and wiring / connector options please contact our sales and applications support team.

Motor Highlights

High continuous linear force output for size
Digitally controlled - easy to use with a micro processor
Cost effective - compact design, lower integration cost
Maintenance free - no brushes to replace
Unipolar and bipolar winding options
Captive and non-captive designs
Long life - ball bearing design

Customization Available

Coil modifications - resistance and inductance
Magnets - to yield higher linear force or reduced detent levels
Higher strength plastics for higher impact forces
Reduced or increased detent force to suit the application
Screw - metric or imperial tips, length
Special flanges, connectors, end of motion detection sensors
Wire harness - connectors, pins, lead length, shrink tubing

Applications

Infusion Systems
Pipettes
Damper Actuation
Flap actuation
Printers and copiers
Switching systems

Downloads

Winding unit	26DBMXXD1B-L	26DBMXXD1U-L	26DBMXXD2B-L	26DBMXXD2U-L
Diameter in	1.02	1.02	1.02	1.02
Diameter mm	26.0	26.0	26.0	26.0
Operating Voltage V	5	5	12	12
Resistance per Phase, ± 10% Ohms	14.6	14.6	84.0	84.0
Inductance per Phase, typ mH	8.4	5.0	43.3	26.5
Rated Current per Phase A	0.34	0.34	0.14	0.14
Max. Holding Force* @ .001" (0.0254 mm) / Step N	35.6	34.2	35.6	34.2
Max. Holding Force* @ .001" (0.0254 mm) / Step oz	128.0	123.0	128.0	123.0
Max. Holding Force* @ .002" (0.0508 mm) / Step N	28.9	28.1	28.9	28.1
Max. Holding Force* @ .002" (0.0508 mm) / Step oz	104.0	101.0	104.0	101.0
Max. Holding Force* @ .004" (0.1016 mm) / Step N	19.2	17.8	19.2	17.8
Max. Holding Force* @ .004" (0.1016 mm) / Step oz	69.0	64.0	69.0	64.0
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energized) N	55.6	55.6	55.6	55.6
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energized) oz	200.0	200.0	200.0	200.0
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energized) N	13.9	13.9	13.9	13.9
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energized) oz	50.0	50.0	50.0	50.0
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energized) N	5.5	5.5	5.5	5.5
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energized) oz	20.0	20.0	20.0	20.0
Max. Travel @ 0.001" (0.0254 mm) / Step mm	48.0	48.0	48.0	48.0
Max. Travel @ 0.001" (0.0254 mm) / Step in	1.9	1.9	1.9	1.9
Max. Travel @ 0.002" (0.0508 mm) / Step mm	48.0	48.0	48.0	48.0
Max. Travel @ 0.002" (0.0508 mm) / Step in	1.9	1.9	1.9	1.9
Max. Travel @ 0.004" (0.1016 mm) / Step mm	48.0	48.0	48.0	48.0
Max. Travel @ 0.004" (0.1016 mm) / Step in	1.9	1.9	1.9	1.9
Step Angle degree	7.5 ± .5	7.5 ± .5	7.5 ± .5	7.5 ± .5
Steps per Revolution	48	48	48	48
Ambient temperature range, operating °C	-20 to +70	-20 to +70	-20 to +70	-20 to +70
Ambient temperature range, operating °F	-4 to +158	-4 to +158	-4 to +158	-4 to +158
Maximum Coil Temperature °F	266	266	266	266
Maximum Coil Temperature °C	130	130	130	130
Bearing Type	Ball Bearing	Ball Bearing	Ball Bearing	Ball Bearing
Insulation Resistance at 500 VDC Mohms	20	20	20	20
Dielectric Withstanding Voltage VAC	650 for 2 seconds	650 for 2 seconds	650 for 2 seconds	650 for 2 seconds
Weight g	34.0	34.0	34.0	34.0
Weight oz	1.20	1.20	1.20	1.20
Leadwire	AWG 28, UL 1429	AWG 28, UL 1429	AWG 28, UL 1429	AWG 28, UL 1429

26DBM-L Permanent Magnet Stepper Digital Linear Actuator

Permanent Magnet Stepper Digital Linear Actuator

Motor Highlights

Customization Available

Applications

Request File

Subscribe

Authenticate