42DBL-L Permanent Magnet Stepper Digital Linear Actuator
Permanent Magnet Stepper Digital Linear Actuator
Winding unit | 42DBLXXC1B-L | 42DBLXXC1U-L | 42DBLXXC2B-L | 42DBLXXC2U-L |
---|---|---|---|---|
Diameter in | 1.65 | 1.65 | 1.65 | 1.65 |
Diameter mm | 42.0 | 42.0 | 42.0 | 42.0 |
Operating Voltage V | 5 | 5 | 12 | 12 |
Resistance per Phase, ± 10% Ohms | 5.0 | 5.0 | 28.8 | 28.8 |
Inductance per Phase, typ mH | 5.5 | 3.7 | 39.3 | 15.0 |
Rated Current per Phase A | 1.00 | 1.00 | 0.42 | 0.42 |
Nominal Voltage (Volt) | ||||
Max continuous Current (A) | ||||
Peak Current (A) | ||||
Shaft Load Max Axial (lb) | ||||
Shaft Load Max Axial (N) | ||||
Shaft Load Max Radial (lb) | ||||
Shaft Load Max Radial (N) | ||||
Max. Holding Force* @ .001" (0.0254 mm) / Step N | 102.9 | 100.0 | 102.9 | 100.0 |
Max. Holding Force* @ .001" (0.0254 mm) / Step oz | 370.0 | 360.0 | 370.0 | 360.0 |
Max. Holding Force* @ .002" (0.0508 mm) / Step N | 83.4 | 72.3 | 83.4 | 72.3 |
Max. Holding Force* @ .002" (0.0508 mm) / Step oz | 300.0 | 260.0 | 300.0 | 260.0 |
Max. Holding Force* @ .004" (0.1016 mm) / Step N | 55.6 | 50.0 | 55.6 | 50.0 |
Max. Holding Force* @ .004" (0.1016 mm) / Step oz | 200.0 | 180.0 | 200.0 | 180.0 |
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energized) N | 111.2 | 111.2 | 111.2 | 111.2 |
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energized) oz | 400.0 | 400.0 | 400.0 | 400.0 |
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energized) N | 83.4 | 83.4 | 83.4 | 83.4 |
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energized) oz | 300.0 | 300.0 | 300.0 | 300.0 |
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energized) N | 19.5 | 19.5 | 19.5 | 19.5 |
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energized) oz | 70.0 | 70.0 | 70.0 | 70.0 |
Max. Travel @ 0.001" (0.0254 mm) / Step mm | 76.2 | 76.2 | 76.2 | 76.2 |
Max. Travel @ 0.001" (0.0254 mm) / Step in | 3.0 | 3.0 | 3.0 | 3.0 |
Max. Travel @ 0.002" (0.0508 mm) / Step mm | 76.2 | 76.2 | 76.2 | 76.2 |
Max. Travel @ 0.002" (0.0508 mm) / Step in | 3.0 | 3.0 | 3.0 | 3.0 |
Max. Travel @ 0.004" (0.1016 mm) / Step mm | 76.2 | 76.2 | 76.2 | 76.2 |
Max. Travel @ 0.004" (0.1016 mm) / Step in | 3.0 | 3.0 | 3.0 | 3.0 |
Step Angle degree | 7.5 ± .5 | 7.5 ± .5 | 7.5 ± .5 | 7.5 ± .5 |
Steps per Revolution | 48 | 48 | 48 | 48 |
Ambient temperature range, operating °C | -20 to +70 | -20 to +70 | -20 to +70 | -20 to +70 |
Ambient temperature range, operating °F | -4 to +158 | -4 to +158 | -4 to +158 | -4 to +158 |
Maximum Coil Temperature °F | 266 | 266 | 266 | 266 |
Maximum Coil Temperature °C | 130 | 130 | 130 | 130 |
Bearing Type | Ball Bearing | Ball Bearing | Ball Bearing | Ball Bearing |
Insulation Resistance at 500 VDC Mohms | 20 | 20 | 20 | 20 |
Dielectric Withstanding Voltage VAC | 650 for 2 seconds | 650 for 2 seconds | 650 for 2 seconds | 650 for 2 seconds |
Weight g | 156.0 | 156.0 | 156.0 | 156.0 |
Weight oz | 5.50 | 5.50 | 5.50 | 5.50 |
Leadwire | AWG 26, UL 1430 | AWG 26, UL 1430 | AWG 26, UL 1430 | AWG 26, UL 1430 |